Pre-order: expected ship date to be announced
A master clock for the Eversolo system: a 10 MHz SC-cut OCXO feeding four independently buffered BNC outputs, for the T10, DAC-Z10, DAC-R8 and any source with an external clock input.
The Eversolo C10 is a high-precision master clock. One C10 feeds up to four components from a single reference, such as Eversolo's T10 streaming transport, DAC-Z10 and DAC-R8, or any source with an external clock input.
What is inside?
A custom 10 MHz OCXO (oven-controlled crystal oscillator) built on an SC-cut crystal, a doubly rotated cut that is less sensitive to temperature change and internal stress. It warms up within five minutes at 25 °C, leaves the factory within ±0.01 ppm, drifts less than 0.003 ppm from −20 °C to +60 °C and ages less than 0.002 ppm per day.
How low is the phase noise?
≤ −115 dBc/Hz at 1 Hz, ≤ −129 dBc/Hz at 10 Hz, ≤ −139 dBc/Hz at 100 Hz and ≤ −145 dBc/Hz at 1 kHz, with a noise floor of ≤ −170 dBc/Hz. Short-term stability is below 9E-13 over one second.
What can I connect?
Four independently buffered BNC clock outputs at 50 ohms, all driven by the same clock source. They run at 10, 25 or 100 MHz, or at word-clock frequencies for the 44.1 kHz family (11.2896, 22.5792, 45.1584 MHz) and the 48 kHz family (12.288, 24.576, 49.152 MHz). An SMB 1PPS input takes an external time reference; every C10 is factory-calibrated for 1PPS timing.
Display and size
An 8.8-inch IPS touchscreen shows warm-up, oscillator temperature, operating status and 1PPS calibration in real time. The aluminum-alloy chassis matches Eversolo's full-width components and measures 365 × 310 × 88 mm with feet; it weighs 5.85 kg.
Specifications
| Type | High-precision master clock |
|---|---|
| Clock source | 10 MHz SC-cut ultra-low-noise OCXO |
| Clock outputs | 4 × BNC, independently buffered |
| Output frequencies | 10, 25, 100 MHz; 11.2896, 22.5792, 45.1584 MHz; 12.288, 24.576, 49.152 MHz |
| Output | Square wave, 1.8 Vrms, 50 Ω |
| Time reference input | 1PPS, SMB |
| Warm-up time | Within 5 minutes at 25 °C |
| Factory frequency offset | < ±0.01 ppm @ 10 MHz, 25 °C |
| Stability over temperature | < 0.003 ppm, −20 °C to +60 °C |
| Aging rate | < 0.002 ppm per day |
| Short-term stability | < 9E-13 @ τ = 1 s |
| Phase noise | ≤ −115 dBc/Hz @ 1 Hz; ≤ −129 @ 10 Hz; ≤ −139 @ 100 Hz; ≤ −145 @ 1 kHz |
| Noise floor | ≤ −170 dBc/Hz |
| Display | 8.8-inch IPS touchscreen |
| USB | USB 2.0, firmware updates only |
| Power | AC 100–120 V or 220–240 V, 50/60 Hz, auto-adapting; ≤ 20 W max, ≤ 0.8 W standby |
| Chassis | Aluminum alloy |
| Dimensions (W × D × H) | 365 × 310 × 88 mm (78 mm without feet) |
| Weight | 5.85 kg (8.4 kg packed) |
| In the box | Power cable, 2 clock cables, user manual, screen cloth |
No specifications available.
